Fully Automatic High Speed Facial Tissue Cutting Machine 200 Cut Per Minute
Description of this Fully Automatic High Speed Facial Tissue Cutting Machine 200 Cut Per Minute:
This ACE-FLS Fully Automatic High Speed Facial Tissue Cutting Machine 200 Cut Per Minute is for cutting facial tissue paper, interfold hand paper towels, Z fold paper towels and also coreless toilet rolls. It can accommodate big ranges of cutting sizes. The height of log can be 140mm 150mm etc. It adopts 3 servo motors to control the cutting length and infeed to ensure the cutting accuracy.
Quick details:
1 For cutting facial tissue paper and hand towels
2 High speed 140 cut/min
3 Single lane
4 Servo motor control
5 Big ranges of cutting sizes
Mode technical details of ACE-FLS Fully Automatic High Speed Facial Tissue Cutting Machine 200 Cut Per Minute.
Main structure: single channel.
Applicable material: facial tissues
Designed speed: 150 cut/min
Working speed: 80-140 cut/min
when cutting length 100mm, about 140 cut/min;
when cutting length 230mm, about 120 cut/min.
Infeed channel: With 1 piece of infeed conveyor 3 meters length.
Cutting delivery system: Independent servo control and driving.
Cutting sizes ranges: L 60-300mm adjustable
W 60-110mm
H 25-120mm
Cutting tolerance length: ±1mm
Cutting tolerance vertical: ±1.5mm
Output delivery: During the whole log saw cutting process, the tissues are pressed by Top timing belts + bottom timing belts to prevent the belts getting slippery and guarantee every cut accurate cutting. (But other company machines use flat belts which would definitely get slippery and no-accurate cutting.)
Adopt 2 servo motors to control the timing belts before the circular blade cutting and after the circular blade cutting .(But other companies’ machines use only one servo motor or NO servo motor, controlled by only inverter, which cannot guarantee accurate cutting.)
Circular blade outer diameter: 610mm
Blade grinding/sharpening system: Automatically and pneumatically grinding/sharpening, grinding/sharpening time and interval parameters can be set in the touch screen. For example, you can set it to sharpen for 1 seconds every 30 minutes or every 50 cuts.
Cutting system: 360° rotating cutting. (Not like other companies machines, the cutting system is only up-and-down cutting.)
Trim removal system: Automatically blew away by air. Trimmed size: 20-65mm.
Control system:
PLC programmed control,
Inverter for variable frequency speed control,
Touch screen for operation
Servo driving: adopt 2 servo motors to control the timing belts before the circular blade cutting and after the circular blade cutting .(But other companies’ machines use only one servo motor or NO servo motor, controlled by only inverter, which cannot guarantee accurate cutting.)
Air compressor: 4-8kg/cm2pa, supplied by customer.
Installed Power: 3phase 208v 60hz. total about 6.4kw
Servo system power: about 2 kw
Rotate motor power: about 2.2kw
Blade motor power: about 2.2kw
Machine weight: about 2T.
Machine dimension: about 5x1.9x1.95m LxWxH. Floor plan refer to below.
Brands for parts used for the machine.
Motor: Siemens (Germany)
JSCC motors for infeed conveyor. (Germany)
PLC: Siemens (Germany)
Touch screen: Siemens (Germany)
Inverter: DELTA (Taiwan)
Relays: Weidmuller (Germany)
Sensors: Omron (Japan) or other international brands.
Technical parameters of this Fully Automatic High Speed Facial Tissue Cutting Machine 200 Cut Per Minute.
| Main structure: |
Single lane cutting |
| Applicable material |
Facial tissue and hand towel |
| Designed speed: |
220 cut/min |
| Working speed: |
80-200 cut/min
when cutting length 100mm, about 140 cut/min;
when cutting length 230mm, about 120 cut/min.
|
| Infeed channel: |
With one piece infeed conveyor 3meters |
| Cutting delivery system |
Independent servo control and driving. |
| Cutting sizes ranges: |
L 60-300mm adjustable
W 60-110mm
H 25-120mm
|
| Cutting tolerance length: |
±1mm |
| Cutting tolerance vertical: |
±1.5mm |
Brands of components used on this tissue cutting machine.
| PLC |
Siemens |
| Inverter |
Siemens |
| Touch screen |
Siemens |
| Servo motor |
DELTA |
| Servo drive |
DELTA |
| Bearing |
SKF |
| Electrical parts |
Schneider |
| Steel |
#45 |
Brands of components used on this tissue cutting machine.
PLC Siemens
Inverter Siemens
Touch screen Siemens
Servo motor DELTA
Servo drive DELTA
Bearing SKF
Electrical parts Schneider
Steel #45
FAQ
Q: Are you trading company or manufacturer
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 60-90 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Finished products of this Fully Automatic High Speed Facial Tissue Cutting Machine 200 Cut Per Minute.
Product Tags:
|
|
Double Lanes Touch Screen Facial Tissue Production Line Plc Control Images
|
